Welcome to Qingdao Conqinphi Energy Tech Co.,Ltd

Qingdao Conqinphi Energy Tech Co.,Ltd

Qingdao Conqinphi Energy Tech Co.,LtdLeader of Energy Conservation

Product Center

Recommended Products

Contact information:+86 0532 82812555

Phone:+8618560603256

Fax:0532-86626156

E-mail:miffy@conqinphi.com

Office Add::Floor3, Building4, Haiwan Tiantai Financial Square, Aomen Rd, Jiaozhou,Qingdao,Shandong Province

Factory Add:West end of Kechuang Rd, Jiaobei international industrial zone,jiaobei Sub-District Office,Jiaozhou,Qingdao,Shandong Province

Forced Circulation Evaporator
Location: Home » Product Center » Multiple Effect Evaporator » Forced Circulation Evaporator

Forced Circulation Evaporator

Article source: Popularity:452Release time:2017-05-24
DTB结晶器-改进型.jpg

As the name implies, force is used to drive the liquid through the evaporator tubes thus producing high tube velocities. A high efficiency circulating pump, designed for large volume and sufficient head, is used to supply the force. Proper design results in controlled temperature rise, controlled temperature difference and tube velocities that give optimum heat transfer. This type is recommended for viscous, scaling and salting liquids.As the liquid is only heated
in the steam chest with flashing taking place in the separator and no boiling taking place within the tubes, fouling on hot tube walls is reduced.
Forced Circulation Evaporators may be equipped with either horizontal or vertical steam chests. The circulating pump withdraws liquid from the lower part of the vapor-liquid separator and circulates it through the tubes at a high velocity.Boiling is suppressed in the tubes either by liquid head or an orifice plate. The heated liquid is discharged into the separator where the vapor flashes off due to the temperature difference and is removed through the top outlet. The liquid is discharged at a maintained liquid level.


The Advantages of Forced Circulation Evaporator
1.Operates with extremely low temperature differences
2.High tube velocity
3.Velocity mechanically produced and controlled
4.Gives high rate of heat transfer, rapid evaporation and high concentration without requiring high operating temperatures or large heating surface
5.Maximum recovery of solids
6.Can use horizontal or vertical tubes
7.Tubes are readily accessible for cleaning and inspection
8.Suitable for multiple effects
Product Application
1.Very viscous liquids
2.Scaling liquids tending to produce scale
3.Heat-sensitive materials
4.Crystal producing liquids


* Indicates requiredPurchase:Forced Circulation Evaporator
Contact person: Please fill in your real name
Tel: Please fill in your contact number
*E-mail:
Procurement intention description:
Please fill in the purchase product number and product description, so that we can carry out uniform stocking.
*Verification code:    Not clear?